You are reading GoQuorum development version documentation and some displayed features may not be available in the stable release. You can switch to stable version using the version box at screen bottom.

# Adding nodes to the network

Adding new nodes to an existing network can range from a common occurrence to never happening. In public blockchains, such as the Ethereum Mainnet, new nodes continuously join and talk to the existing network. In permissioned blockchains, this may not happen as often, but it still an important task to achieve as your network evolves.

When adding new nodes to the network, it is important understand that the GoQuorum network and Tessera network are distinct and do not overlap in any way.

Therefore, options applicable to one are not applicable to the other.

In some cases, they may have their own options to achieve similar tasks, but must be specified separately.

## Prerequisites

### Raft

1. On an existing node, add the new peer to the Raft network

> raft.addPeer("enode://239c1f044a2b03b6c4713109af036b775c5418fe4ca63b04b1ce00124af00ddab7cc088fc46020cdc783b6207efe624551be4c06a994993d8d70f684688fb7cf@127.0.0.1:21006?discport=0&raftport=50407")
7


In this example, your new node has a Raft ID of 7.

2. If you are using permissioning, or discovery for Ethereum p2p, please refer here.

3. You now need to initialise the new node with the network’s genesis configuration.

Initialising the new node is exactly the same an the original nodes.

geth --datadir qdata/dd7 init genesis.json


Note

Where you obtain this from will be dependent on the network. You may get it from an existing peer, or a network operator, or elsewhere entirely.

4. Now you can start up the new node and let it sync with the network. The main difference now is the use of the --raftjoinexisting flag, which lets the node know that it is joining an existing network, which is handled differently internally. The Raft ID obtained in step 1 is passed as a parameter to this flag:

 PRIVATE_CONFIG=ignore geth --datadir qdata/dd7 ... OTHER ARGS ... --raft --raftport 50407 --rpcport 22006 --port 21006 --raftjoinexisting 7


The new node is now up and running, and will start syncing the blockchain from existing peers. Once this has completed, it can send new transactions just as any other peer.

### IBFT/Clique

Adding nodes to an IBFT/Clique network is a bit simpler, as it only needs to configure itself rather then be pre-allocated on the network (permissioning aside).

1. Initialise the new node with the network’s genesis configuration.

Initialising the new node is exactly the same an the original nodes:

 geth --datadir qdata/dd7 init genesis.json


Note

Where you obtain this from will be dependent on the network. You may get it from an existing peer, or a network operator, or elsewhere entirely.

2. If you are using permissioning or discovery for Ethereum peer-to-peer, please refer here.

3. Start the new node, pointing either to a bootnode or listing an existing peer in the static-nodes.json file. Once a connection is established, the node will start syncing the blockchain, after which transactions can be sent.

### Extra options

Some options take effect regardless of the consensus mechanism used.

#### Permissioned nodes

If using the permissioned-nodes.json file for permissioning, then you must make sure this file is updated on all nodes before the new node is able to communicate with existing nodes.

You do not need to restart any nodes in order for the changes to take effect.

#### Static node connections

If not using peer-to-peer node discovery (for example, you specified --nodiscover), then the only connections a node made will be to peers defined in the static-nodes.json file.

When adding a new node, you should make sure you have peers defined in its static-nodes.json file.

The more peers you have defined here, the better network connectivity and fault tolerance you have.

Note

• You do not need to update the existing peers static nodes for the connection to be established, although it is good practise to do so.
• You do not need to specify every peer in your static nodes file if you do not wish to connect to every peer directly.

#### Peer-to-peer discovery

If you are using discovery, then more options in addition to static nodes become available.

• Any nodes that are connected to your peers, which at the start will be ones defined in the static node list, will then be visible by you, allowing you to connect to them; this is done automatically.

• You may specify any number of bootnodes, defined by the --bootnodes parameter. This takes a commas separated list of enode URIs, similar to the static-nodes.json file. These act in the same way as static nodes, letting you connect sto them and then find out about other peers, whom you then connect to.

Note

If you have discovery disabled, this means you will not try to find other nodes to connect to, but others can still find and connect to you.

In this tutorial, there will be no focus on the advanced features of adding a new Private Transaction Manager (PTM). This tutorial uses Tessera for any examples.

Adding a new node to the PTM is relatively straight forward, but there are a lot of extra options that can be used, which is what will be explained here.

### Adding a new PTM node

In a basic setting, adding a new PTM node is as simple as making sure you have one of the existing nodes listed in your peer list.

In Tessera, this would equate to the following in the configuration file:

{
"peers": [
{
"url": "http://existingpeer1.com:8080"
}
]
}


From there, Tessera will connect to that peer and discover all the other PTM nodes in the network, connecting to each of them in turn.

Note

You may want to include multiple peers in the peer list in case any of them are offline/unreachable.

### IP whitelisting

The IP Whitelist that Tessera provides allows you restrict connections much like the permissioned-nodes.json file does for GoQuorum.

Only IP addresses/hostnames listed in your peers list will be allowed to connect to you.

See the Tessera configuration page for details on setting it up.

In order to make sure the new node is accepted into the network:

1. You will need to add the new peer to each of the existing nodes before communication is allowed. Tessera provides a way to do this without needing to restart an already running node:

java -jar tessera.jar admin -configfile /path/to/existing-node-config.json -addpeer http://newpeer.com:8080

2. The new peer can be started, setting the peers configuration to mirror the existing network. If there are 3 existing nodes in the network, then the new nodes configuration will look like this:

{
"peers": [
{
"url": "http://existingpeer1.com:8080"
},
{
"url": "http://existingpeer2.com:8080"
},
{
"url": "http://existingpeer3.com:8080"
}
]
}


The new node will allow incoming connections from the existing peers, and then existing peers will allow incoming connections from the new peer!

### Discovery

Tessera discovery is similar to the IP whitelist. The difference being that the IP whitelist blocks communications between nodes, whereas disabling discovery only affects which public keys you keep track of.

See the Tessera configuration page for details on setting it up.

When discovery is disabled, Tessera will only allow keys that are owned by a node in its peer list to be available to the users.

This means that if any keys are found that are owned by a node NOT in your peer list, they are discarded and private transactions cannot be sent to that public key.

Note

This does not affect incoming transactions.

Someone not in your peer list can still send transactions to your node, unless you also enable the IP Whitelist option.

In order to make sure the new node is accepted into the network:

1. You will need to add the new peer to each of the existing nodes before they will accept public keys that are linked to the new peer. Tessera provides a way to do this without needing to restart an already running node:

java -jar tessera.jar admin -configfile /path/to/existing-node-config.json -addpeer http://newpeer.com:8080

2. The new peer can be started, setting the peers configuration to mirror the existing network. Foer example, if there are 3 existing nodes in the network, then the new nodes configuration will look like this:

{
"peers": [
{
"url": "http://existingpeer1.com:8080"
},
{
"url": "http://existingpeer2.com:8080"
},
{
"url": "http://existingpeer3.com:8080"
}
]
}


The new node will now record public keys belonging to the existing peers, and then existing peers will record public keys belonging to the new peer; this allows private transactions to be sent both directions!

## Examples

For a walkthrough of some examples that put into action the above, check out this guide.